 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||||||
About BMS CAT
BMS Catastrophe is Steamatic’s Restoration Technologies Division. BMS CAT is our electronics and engineering section that deals with losses requiring objective assessment consultancy, management and rectification with insurance, technical issues assessment, chemical testing and specially designed cleaning protocols for restoration.
 |
The cost of restoring much of a damage-affected building is approximately 10-30 percent of the cost of replacement. Where electronics are involved, the savings can be even greater. When you consider the value and importance of data and records to business, the costs of not recovering vital information can be beyond measure.
The key is having the right technology, ready for deployment. With a delay, the chances of returning equipment to pre-loss condition decrease. But planning and rapid action can have damage-affected buildings, equipment and records getting the attention they need, and getting them back to pre-loss condition, fast.
BMS CAT is in the business of getting business back to work after an accident happens.
BMS Catastrophe Disaster Recovery Services
Whether you’ve suffered the effects of a fire, storm damage, earthquake or accident, our team will get to work on getting your business back to business. Whatever the situation, BMS CAT will tailor a response that meets your needs as cost-effectively and quickly as possible.
BMS CAT has a wide range of highly developed systems and procedures ready for when disaster strikes. BMS CAT can handle virtually any disaster scenario, for companies of any size. There’s no one more qualified than BMS CAT in managing and restoring the affects of a disaster or major accident. Our expertise includes:
- fire, smoke and soot damage
- water damage, equipment
- water damage, documents and media
- media recovery
- manufacturing and plant.
The key to effective disaster recovery is speed and applying the correct procedures to minimise damage and delay.
Corrosion, decay and degradation of equipment and files begins immediately after fire or water damage occurs. Its control depends on how quickly preventative steps are implemented. Corrosion control is a two-step process that begins with emergency treatment, which creates a state of preservation by drastically slowing the corrosion process. This is followed by restoration procedures where items are disassembled, decontaminated, cleaned, reassembled and tested.
Once emergency treatment has been performed, BMS CAT Electronics Consultants assess the damage by considering these questions:
- is the equipment damaged but restorable, or a total loss?
- in its damaged condition, what is the present value? Is restoration a sound economic choice?
- is the information in memory, on disk or on other type media, retrievable?
- if the equipment is restored, what about warranties and service?
Remember– time is critical. BMS CAT can help you with rapid, accurate assessments on the best options. Getting a response into action, critical time can be lost. The best solution is to have a response solution in place before disaster strikes.
PRE-REGISTERING WITH BMS CAT IS FREE
By Pre-Registering with BMS CAT you are ensuring that your business is better prepared for when disaster strikes. Registering your business means we have the key information that allows us to prepare the most appropriate response, and the ability to respond almost instantly with the best resources and technology. The costs for not being prepared are high, but Pre-Registering with BMS CAT is free. When disaster strikes, you’ll find your Pre-Registration is priceless. Register today or call to find out how a little preparation can prevent a big problem.
 |
FAST RESPONSE IS ESSENTIAL |
|
RECORDS & MEDIA AT RISK |
|
PRE-REGISTRATION MINIMISES LOSS |
